跳至主要内容

How To Proceed The Abrasion Testing ?

Taber abrasion testing machine mainly through the rotation of the grinding method, the use of different types of friction wheel on the sample rotation to detect leather and plastic materials such as wear resistance.
Wear test machine a lot of types, such as Martindale wear-resistant instrument, oscillatory wear-resistant instrument, Xiao Boer wear-resistant instrument, universal wear tester, Taber wear test machine, etc., the following Taber wear test machine, Describe the use of wear testing machine and common faults.

Test preparation:
    -The test object is fixed on the test turntable, select the required test weight loaded;
    -Ensure that the test wheel does not come into contact with the sample fixture during the test;
    -Adjust the governor switch to a minimum;
    -After setting the number of tests according to the test requirements, the machine is in the test state.

Operational specifications:
   - Connect the appropriate power supply 220V or 110V.
   -Adjust the governor switch to a minimum, to avoid excessive speed, resulting in abnormal machine.
   -Turn on the power, first test machine, if no abnormal power is turned off.
   -Press the reset key to reset the counter to zero. According to the requirements to set the number of tests required, the counter can be set up to 99999999 times.
   -Press the RST key on the counter to clear the counter.
   -Press the start button, the machine will enter the test state.
   -Adjust the governor to adjust the speed to the desired test speed.
   -Turn on the vacuum cleaner power switch to start working.
   -After the test is set to the number of counter settings, the machine automatically shuts down in standby mode.
   -Turn off the power, remove the test, clean up the machine.

-------------------------------------------------------------------
For more information about our testing instrument, please contact
·website:http://www.qinsun-lab.com/
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below

标签：

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...
发表评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文