跳至主要内容

Flammability Tester Standards and application

    Combustion tester for a variety of wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials, resistance to burning test. Test, the test piece as the top of the flame, burning 15 seconds, off for 15 seconds, repeat 5 times after the test specimen was burned, can set the burning, extinguishing time and the number of repetitions, and automatic operation.
    

 Flammability tester Standards compliant:
1, Horizontal Combustion Test: UL94HB (ASTM D 635, IEC 60695-11-10, IEC 60707, ISO 1210)
2, vertical burning test: UL 94 V-0, V-1, or V-2 (ASTM D 3801, IEC 60695-11-10, IEC 60707, ISO 1210)
3,500w (125mm) Vertical Combustion Test: 5VA or 5VB (ASTM D 5048, IEC 60695-11-20, IEC 60707, ISO 9772) 500 W (125mm)
4, thin material vertical burning test: VTM-0, VTM-1, or VTM-2 (ASTM D 4804, ISO 9773)
5, the level of foam material combustion test: HF-1, HF-2 or HBF (ASTM D 4986, ISO 9772)
6, burner: (ASTM D 5025, ASTM D 5207, ISO 10093, ISO 103351)

 Horizontal and Vertical Combustion Tester is  simulating the fire early stage  in the surrounding environment of electrical and electronic products. It is used to simulate the fire hazard. The surrounding fire of the product ensures that it will not cause the combustion to spread. Test equipment for electrical and electronic household appliances parts, parts and components, such as: household appliances, insulation shell, switch panels, printed circuit boards and insulation materials. This type of UL94 horizontal and vertical combustion test instrument is designed for flammable performance testing of equipment and appliance parts. Many of the test indicators for end use such as flammability, combustion rate, flame spread, combustion strength and flame retardancy of the product Are detectable. High degree of automation, accurate test data, is our high demand for users to launch the latest tester.
For more information about our testing instrument, please contact

·website:http://www.qinsun-lab.com/

· Phone :+86-21-6780 0179


· E-mail :info@qinsun-lab.com 

评论

发表评论

此博客中的热门博文

The Leather Friction Color Fastness Tester

Leather friction color fastness tester applied to test leather property in shoes, clothing, luggage handbag industry, research laboratories; commodity inspection, arbitration and technical supervision departments.Leather friction color fastness tester test the degree of decolorization of dyeing leather after friction. It can used to test the leather color resistance to dry, wet and friction. This instrument is suitable for leather, textile, belt, trademarks, cardboard and other friction materials by foreign object damage and decoloring. The machine is designed to carry out a rub fastness test on the surface of leather or coated fabrics to determine the marring of the surface finish and to assess the amount of color transfer from the sample to the rubbing pad. This machine is designed to determining the colorfastness of leather, plastics and textile materials. The colorfastness is assessed by checking change in color of the specimen and stain of the felt after rubbing the ...

How Sublimation Fastness Tester Works?

Sublimation Fastness Tester is a suitable instrument for dyestuff manufacturers as well as textile processors for checking effects of dry heat on dyestuff. Qinsun-lab offers Sublimation Fastness Tester of the best quality and at the best price which gives accurate results.    Features of Sublimation Fastness Tester : Testing the effect of direct heat on the dyestuff; up to 250°C temperature range; Independent digital timers with the minimum display of 1℃(one with each of top and bottom plates, respectively); Can test entire range of temperature in a single test.                           Working Principle: A dyed cloth piece is sandwiched between two undyed pieces and placed to cover the heat pads and the test goes on for a preset time period. The fabric pieces should be picked up immediately. The undyed fabric pieces will be stained by the dyes. This gives the sublimation fastness ...

what is the Working Principle of fogging tester?

Fogging Test Chamber   is the best tool to determine the fogging characteristics of automotive or other vehicle interior materials. The fogging tester is applicable for gravimetric method, photometric method and haze measurement method. Working Principle: The main frame of the Fogging tester includes a water sink fully filled with specified ethylene glycol, which can reach a high temperature. At the time of testing, leather specimens are put in the six standard glass containers filled with  high temperature liquid, and the stainless steel containers are placed above each glass. Relying on the constant water flow distribution, the temperature can maintain at 20℃ constantly, and it can be adjusted through the regulation device connected to the main frame. This controlled environment condition will generate a layer of “fog” on the surface of specimens. The operator can determine the fogging characteristics of materials based on gravimetric analysis method or refraction...