跳至主要内容

Melt-blown Fabric For Making Surgical Mask

    Surgical mask has good filtration effect on bacteria and viruses, breathable, comfortable and clean, and is widely used by modern doctors.The surgical mask is subdivided into three types according to its usage: disposable surgical mask, surgical mask and medical protective mask.Disposable surgical mask is suitable for wearing and blocking the exhalation or ejection of pollutants in the oral cavity and nasal cavity in the general medical environment.
  
    The following are the basical test machines which are used to test the quality of melt-blown nonwovens for making Surgical mask.Qinsun intruments company is a textile test machines manufacturer .we also have the test machines for masks testing.
     
  

The melt-blown nonwovens are made of thermoplastic synthetic polymer, directly from the polymer stage to randomly-laid nonwoven mat or fabrics by using the melt-blown spinning process.The non-woven fabric means it is produced directly from fiber stage or from polymers to fabric without the needing of an intermediate process like spinning or yarn formation. 

Test Items for Melt-blown fabric:
Weight is basic property of nonwovens, used to reflect the quality of products per unit area
Waterproof property show the property that fabric is permeate, in medical and health care material, show the ability that product suffer liquid pressure, the bigger the better.
Electrostatic attenuation is an index to describe the dissipative electrostatic capacity of product. The better the antistatic performance, the lesser easy for electrostatic to gather on , and the better safety of the product.
Breaking capacity and elongation represent the maximum force required to break the product
Wear resistance can be applied to a variety of fabrics, reflecting actual wear and durability factors, among which the martindale method is often used.
Water permeability test reflects performance of the product against water.

评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...