Testile Testing Equipment, Textile Testing Products, Retail Textile Testing Standards.

Almost all appliance manufacturers recommend buying and using detergents because only he has a low water level at the top loader if you use excess detergent to produce excess foam. Add a detergent, bleach and fabric softener to the drawer drawer, similar to the front loader. Put your dirty clothes in the washing machine, like putting something in a similar heap. At the same time, do not put the bathtub, because many of his front loaders automatically perceive the size of the load and the level of the machine can not be fully reached to determine the water on the barrel. He is self-evident in many machine cycles, such as white, color and delicate clothes, and some even have a cleaning cycle. However,  American Standard Whirlpool washing machine  may have the option to change the cycle parameters using the electronic control panel. American standard shrinkage washing machine   Stains and dirt The user can adjust and fine tune the wash cycle at the top loader. While manufacturer

Fire is one of the major disasters that endanger people's lives and property and undermine economic construction. It has seriously affected people's normal work and life, resulting in huge economic losses and even personal injury. There are many reasons for the occurrence of a fire, the main reason is the use of a large number of combustible materials in the working and living environment, where the probability of firewood is very high. According to statistics, because the textile does not fire caused by the fire accounted for about half of the total number of fire. Therefore, in order to reduce the fire caused by textiles, research on textile flame retardant technology, the development of flame-retardant textiles, the development of fire-retardant textiles application of the norms and related policies has become an important issue. Many countries have adopted flame retardant materials and flame retardant products as a legislative requirement, competing to dev

Test instrument - Softness tester Test slit width should be divided into: 5.0mm, 6.35mm, 10.0mm, 20.0mm four grades, the width of the error should not exceed ± 0.05mm. Plate-like probe Dimensions: Long: 240mm Thickness: 2mm Measuring arc radius: 1mm. Average travel speed and total stroke of the probe: Average travel speed: (1.2 ± 0.24) mm / s Total stroke: 12 ± 0.5mm. Sample press-in depth: Pressing depth: mm Slit parallelism: The parallelism of the slit should not exceed 0.05mm. Probe Neutral:      After the probe into the slit probe should be symmetrical symmetry should be less than 0.05mm on both sides. Instrument Accuracy:      Maximum instrument range: 1000mN.      Load Accuracy: ± 1%.      Repeatability: less than 3%. Take the sample:      Use GB / T 450 to take the average sample. Sample handling:      According to GB / T 10739 temperature mission processing, and in this condition for the preparation test. Experimental steps:      Press the Hand Feel Tester to adj