跳至主要内容

Function of Crockmeter Rubbing fastness Tester

Crockmeter Rubbing fastness Tester is used to determine colorfastness of textile to dry or wet rubbing, fitted with hand crank/counter. Provided with a steel specimen holder and 16mm diameter test finger.


Electronic Crockmeter Rubbing fastness Tester is designed to carry out a rub fastness test on the surface of leather or coated fabrics. The rub fastness test determines the marring of the surface finish and assesses the amount of color transfer from the sample to the rubbing pad. The test can be carried out under dry or wet conditions using a dry rubbing pad, or by pre-wetting the rubbing pad in distilled water or a sweat solution prior to testing.



The abrasion effect of soiling on upper materials can also be tested on this machine. Using a small profiled rubber pad in place of felt pad, samples can be tested for the effect. Abrasion of shoe uppers by soiling material can be caused in normal wear particularly when wearers cross their legs and the sole of one foot rests on the upper of the other foot.

Read more on http://www.qinsun-lab.com/

评论

  1. When we wear a clothes for a certain time, decoloration usually happened, and crockmeter is use to determine the colour fastness of them.

    回复删除
  2. The tester seems nice and I would like to recommend the Launderometer to you, which can help you determine color fastness to washing:
    color fastness to washing

    回复删除
  3. 此评论已被博客管理员删除。

    回复删除

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...