跳至主要内容

Operating Procedures of Glow Wire Testing

Glow wire tester will specify the material and shape of the electric wire with a large current heated to the test temperature, the specified pressure (1.0N) vertical hot test sample 30s, depending on the test and bedding is ignited or burning time to determine Electrical and electronic equipment, the risk of fire products; Determination of solid insulation materials and other solid combustible materials, ignition, ignition temperature, flammability and flammability index.

 Glow Wire testing Apparatus Operating procedures1, glow-wire test machine before the preparation of the operation2, be sure to read the use of instructions, and follow the instructions step, followed by operation;3, do not use non-original accessories, so as to avoid danger;4, glow wire test machine on the room to the oil ventilation equipment (or with a special ventilation hood in a small laboratory), in order to test the exhaust after the discharge.5, the two matching weights with copper wire (connected to the sample rack) by the left side of the two pulleys (through the corresponding hole) hanging under the bracket plate.6, according to the standard requirements of interest and clamping samples.7, close to the adjustment of the switchA. The nut that is fixed to the switch is loosened and moved left and right;B. Press the "left button" car automatically forward, when the sample contact with the hot wire, the hand close the switch, so that the car stopped before the fixed and close the switch.C. Press the "Heating" button to adjust the current adjustment knob. According to the requirements of the sample, adjust the appropriate current value, while the temperature is required to meet the test requirements of the required temperature.


 When the test piece touches the glowing wire head, the limit electromagnet is released and the 1N weight can only be moved forward by 7mm.When the experiment is finished, eject the heating button and then turn the current adjustment knob to the minimum.

 Read more on http://www.qinsun-lab.com/You can follow as below, Qinsun Instruments Co., LTD,   E-mail: info@qinsun-lab.com  



评论

  1. Unknown2018年1月30日 00:08

    The article is nice. Glow wire tester is important to the prevent the fire hazard from electrical parts.

    回复删除
  2. wade2018年9月3日 19:07

    The glow wire test for plastics is to determine the resistance to fire insulating parts. And the glow wire test simulates the situation of what the plastics material will happen when contact with an over-heated part. For more information, please click on https://www.testextextile.com/product/glow-wire-tester/

    回复删除

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...
发表评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文