The Smoke Density Chamber is widely used in all industrial sectors for the determination of smoke generated by solid materials and assemblies mounted in the vertical orientation within a closed chamber.Building smoke density tester, plastic smoke density tester is with built-in burning lamp, and by the smoke box into a 45 ° angle, for the determination of building materials, solid materials and related products combustion static tobacco production.
It measures the specific optical density of smoke generated by materials when an essentially flat specimen, up to 25 mm thick, is exposed to a radiant heat source of 25 kW/m , in a closed chamber, with or without the use of a pilot flame. The radiant heat source can be easily replaced with the Conical Radiant Furnace for testing of specimens in the horizontal orientation according to ISO 5659 and IMO FTP Part 2 requirements.
Features
Test chamber with full width opening door, allowing easy access for sample loading and chamber cleaning;
Photomultiplier control unit with manual zero and span controls designed to be used with the FTT software to perform automatic control of the test procedure on the SDC;
Automatic timing, automatic ignition, automatic exhaust;
luminous flux can be automatically corrected;
With a strong exhaust fan, after the test, the exhaust gas can be discharged outside;
Computer control, including a set of light transmittance measurement software, which can output curve statements, the data can be automatically saved and printed.
Read more on website: http://www.qinsun-lab.com.
E-mail: info@qinsun-lab.com
It measures the specific optical density of smoke generated by materials when an essentially flat specimen, up to 25 mm thick, is exposed to a radiant heat source of 25 kW/m , in a closed chamber, with or without the use of a pilot flame. The radiant heat source can be easily replaced with the Conical Radiant Furnace for testing of specimens in the horizontal orientation according to ISO 5659 and IMO FTP Part 2 requirements.
Features
Test chamber with full width opening door, allowing easy access for sample loading and chamber cleaning;
Photomultiplier control unit with manual zero and span controls designed to be used with the FTT software to perform automatic control of the test procedure on the SDC;
Automatic timing, automatic ignition, automatic exhaust;
luminous flux can be automatically corrected;
With a strong exhaust fan, after the test, the exhaust gas can be discharged outside;
Computer control, including a set of light transmittance measurement software, which can output curve statements, the data can be automatically saved and printed.
Read more on website: http://www.qinsun-lab.com.
E-mail: info@qinsun-lab.com
评论
发表评论