跳至主要内容

The Taber Abrasion Test Principle And Procedure

Strengthening control, the tests on the vamp material selected material with highwear resistance strength to the top of the shoe, shoe, such as easily damaged parts, in raising the overall durable performance and service life of shoes is of great significance. taber abrasion and wear tester and double-head taber abrasionand wear tester  have been recognized by more and more domestic and foreign customers because of its advantages such as simple operation, stable result and wide application range.


Taber Abrasion tester Test principle
Be placed on a rotating platform test samples, through the rotating platform as the above two rolling friction wheel, friction wheel under certain load and the specimen for rotating friction movement to wear. One friction wheel is outwards, and another friction wheel is in the inner friction sample. The abrasion marks are an overlapping ring. After the specified friction winding number, according to the surface wear condition and color change degree, the grading evaluation.

Test conditions
In temperature (20 + 2) ℃, humidity (65% + / - 5%) under the condition of test. Before the test, the sample should be placed in the standard environment of GB/ t22049-2008 standard environment for the environmental regulation and testing of shoes and shoes, and adjust the above 4h.

Abrasion and wear Tester test procedure
Fix the sample face up on the rotating platform and install the selected grinding wheel on the support pressure bar.
After selecting the appropriate load, put the support lever down, make the grinding wheel contact with the sample surface, connect and open the dust collecting device.
Start the instrument and test the number of cycles set by the counter. For vamp material, the number of friction is used 500 times.
After the test, remove the sample, check and record the abrasion of the sample, and use of the grey CARDS according to GB/T250-2008 "textile color fastness test assessment change color with the grey CARDS" qualification test area changes color and color fastness rating.

评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...

3 main functional values of the Burning Manikin System

3 main functional values of the Burning Manikin System 1) Research on the heat transfer mechanism of individual soldier's flame retardant equipment By simulating the battlefield fire conditions of different intensities, the changes of human skin surface heat flow and skin temperature by burning dummies, a good human body-clothing-fire environment conditions are created, and the individual soldiers are flame retardant The study of equipment heat transfer mechanism provides an important research method. 2) Research and screening of flame retardant fabrics for individual soldier equipment Quantitatively test the flame retardant properties of different individual soldier equipment fabrics through the burning dummy system, guide the research on flame retardant fabrics, and screen out flame retardant fabrics with excellent performance. 3) Structure and style design of individual soldier's flame retardant protective equipment The structure and style of individual soldier's flame r...