跳至主要内容

Tear Resistance Tester For Tear Testing


Most tear resistance tests are performed statically and commonly take one of three forms. These forms differ from one another in the configuration and preparation of the test sample, the grip placement, and the rate of testing.

The first form is referred to as the trouser shape tear test and involves a rectangular sample that has a cut down the middle of one half of the sample so that two legs are formed and the sample resembles a pair of trousers. Each leg is then placed into one of the test grips and is then pulled apart so that the tear continues down the middle of the sample.

The second form is the tongue tear test and requires that the sample have a tab cut in the middle. This tab is cut so that so that it is separated the rest of the sample on the bottom and sides but not the top. The tab is then placed in the top grip while the rest of the sample is placed in the bottom grip. As the top grip is moved upward the tab is pulled so that the cuts on both sides are extended upward to the top of the sample and the tab is eventually pulled free leaving a rectangular piece in the top grip and a “U” shaped piece in the bottom.

Finally in the case of the trapezoid tear test the test sample is cut into the form of an isosceles trapezoid with a small cut made in one side. The sample is then loaded into the test fixture so that the tear made by the cut will propagate as the grips move apart. Generally the sample is orientated so the tear extends horizontally.

 Tear resistance tester for tear testing:
The Digital Elmendorf Tearing Tester is using Elmendorf method to determine the tear force of textile fabrics which requires to propagate a single-rip tear of defined length from a cut in a fabric when a sudden force is applied. Test range is 200-32000CN, while the impact force is corresponding to the specific pendulum. They determine ballistic tearing strength by propagating a single-rip tongue-type tear starting from a cut in a sample. The design is much user-friendly with wide range to meet different test and standards.
For more information about our testing instrument, please contact

·website:http://www.qinsun-lab.com/

· Phone :+86-21-6780 0179

· E-mail :info@qinsun-lab.com

标签：

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文

The Scratch Tester Working Principle From Qinsun LAB

The scratch test machine is used to evaluate the shear, scratch, planing, scraping and engraving performance of the material. Its applications include rigid organic materials, plastics and glass, and so on. The test parameters, such as the speed of scratches, the length of scratches, the distance between scratches and the number of lines, are the test equipment with strong applicability and convenience. scratch tester Working principle: Coating has three aspects: the action of protection, decoration, and hide the defects of products, and the three main hardness has a lot to do with paint, paint film hardness is said film one of the important properties of mechanical strength, is an important indicator of measuring coating product quality, and measure the coating hardness is an important index of the scratch resistance of determination; Coating good product in the process of packaging, transport and use will draw by hard brush, not row brush the paint film is often leave scratc...
2 条评论
阅读全文