跳至主要内容

Salt Spray Test Chamber For ASTM B117 Testing

      The Salt Spray test is performed not exclusively to test the erosion obstruction of tops, nuts, and fasteners yet in addition keeps the event of consumption, as it were, from metal items to improve the genuine working existence of the item. This test likewise makes a reasonable examination as far as erosion between the latches and jolts that are secured with a covered shield with the unprotected ones. Subsequent to playing out the consumption test on the example, it very
well may be recorded effectively that the examples with a defensive shield are best for long haul utilization as looks at to that of uncoated ones.


           The best gadget to play out the salt spray test is Salt Spray Tester. qinsun-lab offers premium quality and a wide exhibit of chambers that are utilized to test the erosion opposition capacity of the metals and related items. These instruments are planned according to the ASTM B117 standard test which is presented by global institutionalization expert. It is an excellent testing gadget that can evaluate the rust-proofness of segments that can without much of a stretch withstand distinctive air conditions.


        The test temperature in the Salt Spray Test chamber  is client movable from surrounding to +40 degree and is constrained by a PID controller framework. The HMI based touch screen introduced in the Presto salt shower chamber is an incredible asset that facilitates the investigation of erosion obstruction for a wide assortment of test types. An uncommon zero erosion PT 100 sensor is joined in the mechanical assembly.

 For more information :www.qinsun-lab.com, please contact
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below

标签

标签：

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文

The Scratch Tester Working Principle From Qinsun LAB

The scratch test machine is used to evaluate the shear, scratch, planing, scraping and engraving performance of the material. Its applications include rigid organic materials, plastics and glass, and so on. The test parameters, such as the speed of scratches, the length of scratches, the distance between scratches and the number of lines, are the test equipment with strong applicability and convenience. scratch tester Working principle: Coating has three aspects: the action of protection, decoration, and hide the defects of products, and the three main hardness has a lot to do with paint, paint film hardness is said film one of the important properties of mechanical strength, is an important indicator of measuring coating product quality, and measure the coating hardness is an important index of the scratch resistance of determination; Coating good product in the process of packaging, transport and use will draw by hard brush, not row brush the paint film is often leave scratc...
2 条评论
阅读全文