跳至主要内容

Hydrostatic Head Tester For Medical MaskTesting

   Textile Test Instrument Manufacturer-Qinsunlab : Hydrostatic Head Tester is designed to determine the waterproof property of outdoor wears, umbrella, and waterproof fabric. It is also used to test the resistance of permeability of synthetic blood for materials used in protective clothing.

    Hydrostatic head or sometimes just is an outdoor industry standard way of measuring how much force it takes to force water through a piece of fabric.

    The way that it is measured is by clamping a piece of fabric over the bottom of the tube and slowly filling the tube with water.

   The hydrostatic head measurement just refers to how high the water got up to tube before it forced its way through the material.

   An example would be a tent for summer use with a hydrostatic head measurement of 1000 mm. This means that the water in the tube got to 1000 mm high before it pushed its way through the fabric.

   However that doesn’t mean that your tent will be able to go 1m underwater before leaking because the hydrostatic head test is in a controlled environment where there is very little movement of the water and the pressure is increased quite gradually.

   A hydrostatic head measurement of just 1000 mm really only equates to a shower of rain.

   Where you have a material which is used in a jacket or something which is going to be rubbing and pushing water through it the hydrostatic head measurement will need to be in excess of 5000 mm in order to be considered properly waterproof.
For more information about our testing instrument, please contact
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below


评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文

The Scratch Tester Working Principle From Qinsun LAB

The scratch test machine is used to evaluate the shear, scratch, planing, scraping and engraving performance of the material. Its applications include rigid organic materials, plastics and glass, and so on. The test parameters, such as the speed of scratches, the length of scratches, the distance between scratches and the number of lines, are the test equipment with strong applicability and convenience. scratch tester Working principle: Coating has three aspects: the action of protection, decoration, and hide the defects of products, and the three main hardness has a lot to do with paint, paint film hardness is said film one of the important properties of mechanical strength, is an important indicator of measuring coating product quality, and measure the coating hardness is an important index of the scratch resistance of determination; Coating good product in the process of packaging, transport and use will draw by hard brush, not row brush the paint film is often leave scratc...
2 条评论
阅读全文