跳至主要内容

Masks Test Instruments ForTesting and Quality Control

      The current epidemic of new coronavirus pneumonia is still spreading. China's mask production capacity has been stepped up to recover, but in the face of a huge gap, it is still in short supply. China has also begun to encourage qualified enterprises to switch to production masks, and many domestic companies have responded to the call to switch to production masks.

     How do you know if a mask is protective? I believe that every newly converted mask manufacturer wants to know. The following will give you the answer:

     In each country, there are relevant mask standards to control the masks quality, thereby effectively helping the masks to be sold domestically or externally. Specific test items are specified within specific standards, and each test item specifies specific test methods and parameter requirements. Once the standards are determined, you know which items need to be tested? What instruments are used for testing?

   Just like a disposable medical face masks manufacturer in china ,there are three test instruments for testing and quality control.such as BFE Tester、airflow tester 、Dry microbial penetration resistance tester .
 masks
Standards
Test items
Test instrument
Disposable medical face masks
YY/T 0469-2011
BFE test
BFE TESTER
 Disposable medical face masks
YY/T 0469-2011
Airflow
Masks airflow tester
 Disposable medical face masks
 YY/T 0469-2011
Dry microbial penetration
Dry microbial penetration resistance tester
Any question ,please contact us :info@qinsun-lab.com

标签：

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...
发表评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文