跳至主要内容

How Sublimation Fastness Tester Works?

Sublimation Fastness Tester is a suitable instrument for dyestuff manufacturers as well as textile processors for checking effects of dry heat on dyestuff. Qinsun-lab offers Sublimation Fastness Tester of the best quality and at the best price which gives accurate results.   



  • Testing the effect of direct heat on the dyestuff;
  • up to 250°C temperature range;
  • Independent digital timers with the minimum display of 1℃(one with each of top and bottom plates, respectively);
  • Can test entire range of temperature in a single test.

                         

Working Principle:
  • A dyed cloth piece is sandwiched between two undyed pieces and placed to cover the heat pads and the test goes on for a preset time period.
  • The fabric pieces should be picked up immediately. The undyed fabric pieces will be stained by the dyes.
  • This gives the sublimation fastness properties for the range of temperature 130°C to 250°C in one test.
  • A ready comparison of sublimation fastness properties at various temperatures is hence available. 

For more information about our Sublimation Fastness Tester , please contact
· +86-21-6780 0179
· or leave your comments below

评论

  1. Scorch Tester, to determine fabrics Ironing color fastness and sublimation color fastness, and dimensional stability under hot dry conditions. Sublimation Fastness Tester complies with ISO 105, BS 1006, AATCC 92/114/117/133. If you want to know more, please see that https://www.testextextile.com/product/scorch-tester-sublimation-fastness-tester-tf415d/

    回复删除

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...

The Scratch Tester Working Principle From Qinsun LAB

The scratch test machine is used to evaluate the shear, scratch, planing, scraping and engraving performance of the material. Its applications include rigid organic materials, plastics and glass, and so on. The test parameters, such as the speed of scratches, the length of scratches, the distance between scratches and the number of lines, are the test equipment with strong applicability and convenience. scratch tester Working principle: Coating has three aspects: the action of protection, decoration, and hide the defects of products, and the three main hardness has a lot to do with paint, paint film hardness is said film one of the important properties of mechanical strength, is an important indicator of measuring coating product quality, and measure the coating hardness is an important index of the scratch resistance of determination; Coating good product in the process of packaging, transport and use will draw by hard brush, not row brush the paint film is often leave scratc...