跳至主要内容

Atomization Fogging Tester Test Principle And Steps


The Fogging Tester is used to test the characteristics of fogging of leather and fabric under certain environmental conditions. In the car plastic parts atomization tester for automotive, aircraft and other interior materials, such as automotive interior plastic parts, polyurethane, textiles, leather, adhesives, nonwovens, thermoplastic elastomers and other materials at high temperatures The evaluation of the evaporation of sexual components can also be used for the determination of high temperature atomization of xenon lamps.
automotive interiors fogging tester Test principle: the sample in the fog cup was heated and began to volatilize, volatile gas has been cooled in the cooling of the glass or aluminum foil on the condensation. After the completion of the condensation process, the glass plate or aluminum foil was removed and the atomization and volatilization characteristics of the sample were obtained by measuring the atomization value or weight of the condensing component of the glass plate or aluminum foil and comparing it with the data before being condensed.

Measurement of the automotive interior fogging testing machine:Gloss method: the sample in the fog cup heated by the evaporation of the gas condensed in the low-temperature glass plate, through the glass plate before and after condensation of the gloss value of the comparison and calculation, can be obtained into the fog of the sample. (Standard)Haze method: the sample in the fog cup heated by the evaporation of the gas condensed in the low-temperature glass plate, through the glass plate before and after the condensation value of the condensation and calculation, can be obtained into the fog of the sample. (Optional)Gravimetric method: the sample in the fog cup heated by the evaporation of the gas condensed on the low-temperature aluminum foil, by weighing the weight of aluminum foil before and after the change, we can get the sample atomization - coagulation weight. (Standard, balance purchase)

Fogging index test instrument operation steps:Prepare the sample → open the high and low temperature bath and reach the set temperature → clean the fog cup and fog glass plate → place the sample → place the fog glass or aluminum foil → place the cooling chamber → two slots to keep the set temperature and normal Run to test request time → Remove the glass or aluminum foil for a specified time → Measure the gloss, haze or weight of the foil • Compare the data and get the final result.
标签：

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...
发表评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文