跳至主要内容

Dry Cleaning & Washing Cylinder For Testing

     Dry cleaning is any cleaning process for clothing and textiles using a chemical solvent other than water. It is used to clean fabrics that degrade in water, and delicate fabrics that cannot withstand the rough and tumble of a washing machine and clothes dryer. It can eliminate labor-intensive hand washing.


Dry Cleaning & Washing Cylinder used to determine the colorfastness to dry cleaning and chlorinated pool water, also it can suitable for preparing the specimen before flammability testing.Dry cleaning & washing cylinder included bracket, stainless steel dry cleaning cylinder and electric control case. Rotation speed of the cylinder could be adjusted and testing time could be set.

Operation:
Clean the dry cleaning cylinder
Prepare the hardness concentrates according to the relevant standards.
51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 °C.
Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
Get out the sample and remove the excess solution.
For more information about our testing instrument, please contact
·website:http://www.qinsun-lab.com/

· +86-21-6780 0179

· info@qinsun-lab.com

· or leave your comments below

评论

  1. here is the Elmendorf Tear tester to test the extiles, plastics, paper or board, it complies with ASTM D1424/1922/5734, ISO 1974/9290/6383-2, BS ISO 13937, etc. If you want to know more, you can click here: http://www.testextextile.com/product/elmendorf-tear-tester-tf140c/

    回复删除

发表评论

此博客中的热门博文

The Leather Friction Color Fastness Tester

Leather friction color fastness tester applied to test leather property in shoes, clothing, luggage handbag industry, research laboratories; commodity inspection, arbitration and technical supervision departments.Leather friction color fastness tester test the degree of decolorization of dyeing leather after friction. It can used to test the leather color resistance to dry, wet and friction. This instrument is suitable for leather, textile, belt, trademarks, cardboard and other friction materials by foreign object damage and decoloring. The machine is designed to carry out a rub fastness test on the surface of leather or coated fabrics to determine the marring of the surface finish and to assess the amount of color transfer from the sample to the rubbing pad. This machine is designed to determining the colorfastness of leather, plastics and textile materials. The colorfastness is assessed by checking change in color of the specimen and stain of the felt after rubbing the ...

How Sublimation Fastness Tester Works?

Sublimation Fastness Tester is a suitable instrument for dyestuff manufacturers as well as textile processors for checking effects of dry heat on dyestuff. Qinsun-lab offers Sublimation Fastness Tester of the best quality and at the best price which gives accurate results.    Features of Sublimation Fastness Tester : Testing the effect of direct heat on the dyestuff; up to 250°C temperature range; Independent digital timers with the minimum display of 1℃(one with each of top and bottom plates, respectively); Can test entire range of temperature in a single test.                           Working Principle: A dyed cloth piece is sandwiched between two undyed pieces and placed to cover the heat pads and the test goes on for a preset time period. The fabric pieces should be picked up immediately. The undyed fabric pieces will be stained by the dyes. This gives the sublimation fastness ...

what is the Working Principle of fogging tester?

Fogging Test Chamber   is the best tool to determine the fogging characteristics of automotive or other vehicle interior materials. The fogging tester is applicable for gravimetric method, photometric method and haze measurement method. Working Principle: The main frame of the Fogging tester includes a water sink fully filled with specified ethylene glycol, which can reach a high temperature. At the time of testing, leather specimens are put in the six standard glass containers filled with  high temperature liquid, and the stainless steel containers are placed above each glass. Relying on the constant water flow distribution, the temperature can maintain at 20℃ constantly, and it can be adjusted through the regulation device connected to the main frame. This controlled environment condition will generate a layer of “fog” on the surface of specimens. The operator can determine the fogging characteristics of materials based on gravimetric analysis method or refraction...