Textile test machine manufacturer : It is known for textile manufacturers that UV aging test chamber can simulate and strengthen the environmental factors in the natural climate that are affected by light, heat, humidity, and rainfall as the main aging. It can simulate the accelerated test under long term exposure to obtain the results of the weather resistance of the material.
UV aging tester is to simulate lighting; it specially simulates products long-term placement in the outdoors. It just takes a few days or weeks to simulate the damage resulting by ultraviolet in sunlight, which takes a few months or years in outdoors.To check whether the products have fading phenomenon, chaseleon phenomenon, brightness decreased, powder phenomenon, cracking phenomenon, fuzzy phenomenon, embrittlement phenomenon, strength loss and oxidation phenomenon; it can also reproduce the destruction of rain and dew at the same time. UV aging test chamber does the test by placing the samples exposed on the interaction of controlled sun and moisture, at the same time increase the temperature.
The following matters should be noted in the application of the anti-yellowing aging test machine:
1. Check whether the power line meets the safety requirement, too thin or loose thread can cause the wire to go off.
2. The machine of air supply motor should be paid attention to whether the motor turns correctly and the air volume is normal.
3. At the beginning of heating, the exhaust valve should be closed to achieve rapid heating effect, and the temperature must be turned on to the required displacement.
4. The ultra-high temperature protection setting should not set more than the maximum temperature range of the machine.
5. After the contents of the dip, special attention should be put on the outside of the box, and then put into the machine table.
6. For items containing water or volatile gas, keep part or all of the exhaust, and do not close the heat.
7. The test sample is best placed in several pieces at the same time so that the test values can be averaged.
8. Turn off the power switch after five minutes.
9. Be sure to turn off the power supply or pull off the socket after use.
10. If the captain is in use, and no one is present, please call the guards to pay attention.
11. This machine is used. If there is any abnormal condition, it should be stopped and can be used after inspection.
For more information about our testing instrument, please contact
·website:http://www.qinsun-lab.com/
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below
UV aging tester is to simulate lighting; it specially simulates products long-term placement in the outdoors. It just takes a few days or weeks to simulate the damage resulting by ultraviolet in sunlight, which takes a few months or years in outdoors.To check whether the products have fading phenomenon, chaseleon phenomenon, brightness decreased, powder phenomenon, cracking phenomenon, fuzzy phenomenon, embrittlement phenomenon, strength loss and oxidation phenomenon; it can also reproduce the destruction of rain and dew at the same time. UV aging test chamber does the test by placing the samples exposed on the interaction of controlled sun and moisture, at the same time increase the temperature.
The following matters should be noted in the application of the anti-yellowing aging test machine:
1. Check whether the power line meets the safety requirement, too thin or loose thread can cause the wire to go off.
2. The machine of air supply motor should be paid attention to whether the motor turns correctly and the air volume is normal.
3. At the beginning of heating, the exhaust valve should be closed to achieve rapid heating effect, and the temperature must be turned on to the required displacement.
4. The ultra-high temperature protection setting should not set more than the maximum temperature range of the machine.
5. After the contents of the dip, special attention should be put on the outside of the box, and then put into the machine table.
6. For items containing water or volatile gas, keep part or all of the exhaust, and do not close the heat.
7. The test sample is best placed in several pieces at the same time so that the test values can be averaged.
8. Turn off the power switch after five minutes.
9. Be sure to turn off the power supply or pull off the socket after use.
10. If the captain is in use, and no one is present, please call the guards to pay attention.
11. This machine is used. If there is any abnormal condition, it should be stopped and can be used after inspection.
For more information about our testing instrument, please contact
·website:http://www.qinsun-lab.com/
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below
评论
发表评论