跳至主要内容

hydraulic bursting strength tester

 Applications

To determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic loading under a rubber diaphragm. The intelligent control algorithm gives accurate control of the burst time. Manual or automatic mode. Windows based software could analyze the test results and print, easy to operate. Different test areas can be accommodated allowing testing to corresponding standards.

Standards
ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018 L1093, IWS TM170
 
Parameters

Measuring range: 1%~100%, max to 6.000MPa, minimum value of 0.002MPa;
Diaphragm dimension: outside diameter of Φ80mm, thickness of 0.9±0.1mm;
Clamping device: Φ112.8mm±0.2mm(100cm²),Φ79.8±0.2mm(50cm²),Φ35.7±0.2mm(10cm²),Φ31.5±0.2mm(7.5cm²),Φ30.5±0.2mm(7.3cm²),Φ30±0.2mm;
Max distension height up to: 70±0.02mm;
Max bursting time up to: 99.9±0.1s;
 Rate of increase in volume: 100-500ml/min, manual or automatic adjustment;
Output mode: display and print for output, real-time graphic, online communication;
Operating mode: manual or automatic;
 Hydraulic oil: glycerin of 85%, distilled water of 15%;
Power supply: AC220V 50Hz 2000W;
Dimensions: 750×500×950mm(L×W×H);
Weight: 160kg. 
Several different specimen sizes can be accommodated allowing testing to most corresponding standards, test areas up to 100cm² can be accommodated for GB;
Pneumatic clamping, firm and uniform of grip, can be used for various materials;
PC online communication, statistical analysis, with test reports printed;
Output multiple indexes: bursting pressure, bursting strength, diaphragm pressure, distension height, burst time; convenient to master the sample property for quality control personnel.
 
Accessories
 A host;
Processor with LCD monitor, keyboard and mouse included;
Testing Software;
Test kit (with 5 sets, 112.8 mm glass is in option);
A bottle of glycerin;
Test elastic diaphragms: 2 pieces;
Silent Laboratory Compressor (optional).

评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...

3 main functional values of the Burning Manikin System

3 main functional values of the Burning Manikin System 1) Research on the heat transfer mechanism of individual soldier's flame retardant equipment By simulating the battlefield fire conditions of different intensities, the changes of human skin surface heat flow and skin temperature by burning dummies, a good human body-clothing-fire environment conditions are created, and the individual soldiers are flame retardant The study of equipment heat transfer mechanism provides an important research method. 2) Research and screening of flame retardant fabrics for individual soldier equipment Quantitatively test the flame retardant properties of different individual soldier equipment fabrics through the burning dummy system, guide the research on flame retardant fabrics, and screen out flame retardant fabrics with excellent performance. 3) Structure and style design of individual soldier's flame retardant protective equipment The structure and style of individual soldier's flame r...