跳至主要内容

ink printing durability test machine

 Ink Printing Durability Tester covers a complete and competitive range of Rub Testers which is applicable in abrasion resistance test of printing works, light sensitive layer of PS boards, and coating layers of relative products. It can help users to analyze the affairs of lower abrasion assistance, ink layer falling-off, lower printable of PS boards, and rigid of coating layers of other products.


Ink Rub Resistance Tester

Rub resistance describes the ability of printed material to withstand marking, scuffing or smudge during handling in conversion, packaging, transportation, distribution and use. It simulates a similar environment to test the rub resistance on printed materials.

It is used to analyze the life of label by creating actual environment of application to evaluate abrasion resistance of surface coating layer of printed material.

It simulates the actual working environment of product and helps to identify the quality and printing method to be used for printing of label based on application of product and its working environment.

Applications

    It measures the rub resistance bonding of ink with the printable surface

    Label Printing: It test the abrasion resistance of ink layer of printed materials and effectively analyze the problem of poor abrasion resistance and ink layer falling off. Thus to identify printing method and property of ink to be used for printing of label based on application of product and its working environment.

    Photosensitive Coating: It tests abrasion resistance of photosensitive board coating layers and effectively analyze the problem of lower printing force.

    It can also be used to analyse the rub resistance of different materials and analyse the wearing properties of sample material under consideration.

Features

    Equipped with high end micro-processor to control testing and create the required environment with frequency of rubbing with controlled load
    Ensures even load distribution on rubbing area of sample
    Quiet rubbing process

 

Standard:
 
  1. ASTM D5264 "with Sutherland - standard test method for printed material abrasion resistance test made by printed board tester"
  2. GB7706 “Toppan decoration print"
  3. Ink Abrasion tester is compatible with TAPPI-UM486, ASTMD5264 with JISK5701 and ISO9000 standards.

ink printing durability tester
 

评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...