跳至主要内容

Fabric gsm round cutter

 Round sampler also called round cutter which can apply in different materials quickly and accurately cut out the 100cm2 circular sample of diameter.

 

Applicable Standards: 
ASTM D3776, BS 2471, IWS UNIFIED, JIS L1018 / L1096.
Sampler knife the computing unit weight of textile fabric, paper, cardboard and other items dedicated sampling devices, with a wide range of sample size, high precision, easy to operate, etc..

 

Disc sampler:
This instrument applies to a variety of fabrics such as wool, cotton, chemical fiber, knitting circular sample cut.
Sampling area: 100cm2 round sample,and you can weigh the sample via electric balance in g,g/m2,oz/yd2 and so on.

 

How to use:
Will be cutting fabric tile in the rubber mat on the disc sampler fabric, pull the locking device on the sampler, rotated about 90 degrees, hand held onto the cover, one hand holding the corrugated handwheel and impose certainpressure, then clockwise rotation corrugated handwheel (angle greater than 90 degrees), the round specimen and cut.
Sampler after locking device, rotating to its original position, so that the blade can not be exposed, so as not to hurt the hand, and other items.

 

Structure and adjustment:
Sided blade cutter blade of a total of four for the circular external four equal uniform, the blade can be replaced, the specific operation: Loosen the Phillips screws (four screws on each piece), remove the blade platen sampling blade changeon a new blade, pressure on the blade pressure plate, pay attention to the blade port for the clockwise tangential make the the four incision in the same plane, and then tighten the Phillips screws can be.
Ruled nicks in the bottom of the instrument for a fixed sample, easy to cut to prevent sample slippage.

 

Note:
This instrument blade sharp knife-edge, the use shall hand on the bottom, in order to avoid injury.
Instrument should rubber mat and cut sample, wipe clean the instrument is not on the instrument box to avoid damage.
Reprovision professional high-precision electronic balance, accurately weigh out the amount of grams, suitable for all kinds of textile, fabric, printing and dyeing, sampling factories and foreign trade companies.




评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文

The Scratch Tester Working Principle From Qinsun LAB

The scratch test machine is used to evaluate the shear, scratch, planing, scraping and engraving performance of the material. Its applications include rigid organic materials, plastics and glass, and so on. The test parameters, such as the speed of scratches, the length of scratches, the distance between scratches and the number of lines, are the test equipment with strong applicability and convenience. scratch tester Working principle: Coating has three aspects: the action of protection, decoration, and hide the defects of products, and the three main hardness has a lot to do with paint, paint film hardness is said film one of the important properties of mechanical strength, is an important indicator of measuring coating product quality, and measure the coating hardness is an important index of the scratch resistance of determination; Coating good product in the process of packaging, transport and use will draw by hard brush, not row brush the paint film is often leave scratc...
2 条评论
阅读全文