跳至主要内容

Protective Clothing Vertical Flame Spread Tester

 Introduction:

Protective clothing flame spread tester is made according to ISO 15025 standard. It can test the flame spread state under the small flame .
It is  used to simulate the protective clothing is at the risk of ignition to assume the flame spread performance . 
It is also suitable for the fabric material or other similar functional use of combustible materials .
 
Application：
The instrument is applied for the testing of fire hazard using com-bustible materials, like fabric or other similar functional materials.
 
Standard:
BS EN ISO 15025:2002  
 
Technical Parameters：            
Items:Parameters
Dimension:1200mm X 600mmx 1200mm
Timer accuracy ：0.1s
Power supply ：220v，50/60Hz
 
Features:
1. The combustion chamber is made of stainless steel; nice, corrosion-resistant;Dimension: 1200mm X 600mmx 1200mm
2. All sample holder is made of stainless steel manufacturing,corrosion resistance;
3. Standard burner; flame height level 25mm ± 2mm; vertical 40mm ± 2mm; nozzle opening 0.19mm;
4. The time is automatically recorded, automatic storage; timer accuracy 0.1s;
5. PLC with touch screen control system; to achieve more intelligent test; automatically record test data, automatic storage;
6. Imported brands gauge and control valve, the gas pressure is more stable;
7.Imported needle valve, precise control of the flame height; flame is more stable;
8.High intelligence, simple operation, easy to operate;
9.With the bottom surface of the combustion and combustion of two sample holder; made of stainless steel;
10.Automatic ignition system, automatically turns off;
11.Equipped with a flame height gauge;
12.Pulsed high voltage electronic automatic ignition.
13.Timing button with the PLC automatically record storage combustion time-consuming.
14.Without holding the stopwatch or timer manuscript; the system automatically records the test of time, and generate test reports;
15.The test time and time plus a touch screen can be set to fire. Meet a variety of test standards;
16.Surface combustion and bottom surface combustion burner test program on the touch screen can be switched.
 

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文

The Scratch Tester Working Principle From Qinsun LAB

The scratch test machine is used to evaluate the shear, scratch, planing, scraping and engraving performance of the material. Its applications include rigid organic materials, plastics and glass, and so on. The test parameters, such as the speed of scratches, the length of scratches, the distance between scratches and the number of lines, are the test equipment with strong applicability and convenience. scratch tester Working principle: Coating has three aspects: the action of protection, decoration, and hide the defects of products, and the three main hardness has a lot to do with paint, paint film hardness is said film one of the important properties of mechanical strength, is an important indicator of measuring coating product quality, and measure the coating hardness is an important index of the scratch resistance of determination; Coating good product in the process of packaging, transport and use will draw by hard brush, not row brush the paint film is often leave scratc...
2 条评论
阅读全文