跳至主要内容

Face Mask Particle Protection Tester Echnical Features

 It is equipped with a special salt aerosol generator, which can generate aerosols of specific particle size and concentration.


Automatic control of aerosol generation and automatic calculation of capture efficiency and mask airflow resistance, reducing human intervention.

Equipped with a series of special clamps, suitable for the detection of various masks.

Built-in high life photometer module, accumulated sampling time, prompt optical path cleaning.

Built-in high-precision electronic flowmeter and high-performance sampling pump to ensure flow stability.

Built-in compressor with automatic pneumatic clamping function.Equipped with an anti-static device.

Air Filter Media Test Rigs Application:

Mask Automatic Filter Performance Tester is used for testing professional filter material and filtration efficiencyof a wide range of air filters including HEPA and ULPA filter, respirator, filter cartridge and protective clothing test. It also can use salt or oil mist to test filter media.

Rapid acquisition of filter media performance evaluation parameters, and accurate evaluation of filter material quality, performance, life and so on. It is convenient to user for academic research and product development of new filter materials, product quality control, material performance verification.

Technical Parameters:

ASTM F2100, EN149, NTOSH-42 CFR84
Aerosol channel, two {2}: Latex Spheres and Salt
Efficiency detection: 0.1-10pm Photometer. 0.1-5pm particle counter
Control mode: Laptop with English operation software
Filtration efficiency test range: 0.001-99.999%, resolution 0.001%
Test flow range: 201/min to 1001/min, accuracy 2Yo
Air flow cross sectional area: 100 cm2
Resistance test range: (0-1000) Pa
Power:220V,60 Hz
Dry and clean compressed air source, gas source flow 1981r/min (0.GMpa) at 550kPa
Mainframe (1set) and Mask Test Fixture (1 set)
Detectors: Photometer and Particle Counter
Aerosol Generators: Latex Sphere and Salt

Meltblown automatic filtering efficiency tester

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...
发表评论
阅读全文

Correct Use Of Color Assessment Cabinet

Observation Angle: The following points are all the facilities required for the Color Assessment Cabinet , and the viewing Angle will directly affect the evaluation results. According to international standards, there are only two observable angles that can be used. They are: A, zero light source and 45 degrees observation (0 °, 45 °), the light from zero (vertical) incident Angle on the sample, sample watchers from 45 degrees. B, light source and 45 ° inclined channel 45 degrees of light source, zero observation (0 °, 45 °), the layout must use specific 45 degrees of inclined (45 ° Fixed Angle table) making from 45 degrees of light source on the samples, sample watchers from zero (vertical). The location of the 45 ° light samples: Regardless of any of the above observation methods, it is important to note that the test sample is placed in the middle of the light box as far as possible to reduce the influence of the external light source. In addition, the most important thing...
发表评论
阅读全文