跳至主要内容

PFE Tester - G506

 Medical Face Mask Particle Protection Tester Echnical Features:


It is equipped with a special salt aerosol generator, which can generate aerosols of specific particle size and concentration.

Automatic control of aerosol generation and automatic calculation of capture efficiency and mask airflow resistance, reducing human intervention.

Equipped with a series of special clamps, suitable for the detection of various masks.

Built-in high life photometer module, accumulated sampling time, prompt optical path cleaning.

Built-in high-precision electronic flowmeter and high-performance sampling pump to ensure flow stability.

Built-in compressor with automatic pneumatic clamping function.Equipped with an anti-static device.

Air Filter Media Test Rigs Application:

Mask Automatic Filter Performance Tester is used for testing professional filter material and filtration efficiencyof a wide range of air filters including HEPA and ULPA filter, respirator, filter cartridge and protective clothing test. It also can use salt or oil mist to test filter media.

Rapid acquisition of filter media performance evaluation parameters, and accurate evaluation of filter material quality, performance, life and so on. It is convenient to user for academic research and product development of new filter materials, product quality control, material performance verification.

Technical Parameters:

ASTM F2100, EN149, NTOSH-42 CFR84
Aerosol channel, two {2}: Latex Spheres and Salt
Efficiency detection: 0.1-10pm Photometer. 0.1-5pm particle counter
Control mode: Laptop with English operation software
Filtration efficiency test range: 0.001-99.999%, resolution 0.001%
Test flow range: 201/min to 1001/min, accuracy 2Yo
Air flow cross sectional area: 100 cm2
Resistance test range: (0-1000) Pa
Power:220V,60 Hz
Dry and clean compressed air source, gas source flow 1981r/min (0.GMpa) at 550kPa
Mainframe (1set) and Mask Test Fixture (1 set)
Detectors: Photometer and Particle Counter
Aerosol Generators: Latex Sphere and Salt

Meltblown automatic filtering efficiency tester

评论

发表评论

此博客中的热门博文

How To Process The Elmendorf Tear Strength Test

The Elmendorf tear tester has been developed specially for the paper industry and is outstanding for simplicity of operation and high measurement accuracy. The exchangeable pendulum is equipped with a pneumatic sample clamp. The initiation and return of the pendulum, as well as sample cutting is completely automatic. The device is operated via an integrated touch screen, where the test method can be selected, specific settings can be adjusted, and, after the measurement, results and statistics can be  displayed.Each pendulum is supplied with the appropriate control weight so that, with the help of the service program, it can easily be checked for functionality and balance. The Elmendorf tear test Procedure:     Cotton fabric was taken.     Warp and weft direction of the fabric was identified.     Two strips were cut from the fabric in both directions having dimensions of 100 x 63.5 mm.     The sample was then fixed in the jaws of the ...
8 条评论
阅读全文

Comparative analysis of water-cooled and air-cooled xenon lamp aging tester

Xenon lamp aging test chamber is the core component of using the box full sunlight spectrum xenon lamp tube simulation, under different environmental conditions to simulate the material aging law, through the experimental results to evaluate weather resistance of materials and products. This paper focuses on the comparative analysis of the advantages and characteristics of the water-cooled and air-cooled xenon lamp aging testing machine. Air-cooled xenon lamp aging test machine : A circular wind is used to cool the heat-trapping xenon lamp tube. Air-cooled xenon lamp tubes used in air-cooled xenon lamp aging test box, generally a typhoon cold xenon lamp aging test chamber is equipped with three air-cooled xenon lamp tubes, and table 1 air-cooled xenon lamp weather-resistant chamber equipped with xenon lamp tubes. The power of the air-cooled xenon lamp tube is generally 1.8kw, and the length of the lamp tube is 340mm compared with that of the water-cooled xenon lamp. The diameter of...
发表评论
阅读全文

3 main functional values of the Burning Manikin System

3 main functional values of the Burning Manikin System 1) Research on the heat transfer mechanism of individual soldier's flame retardant equipment By simulating the battlefield fire conditions of different intensities, the changes of human skin surface heat flow and skin temperature by burning dummies, a good human body-clothing-fire environment conditions are created, and the individual soldiers are flame retardant The study of equipment heat transfer mechanism provides an important research method. 2) Research and screening of flame retardant fabrics for individual soldier equipment Quantitatively test the flame retardant properties of different individual soldier equipment fabrics through the burning dummy system, guide the research on flame retardant fabrics, and screen out flame retardant fabrics with excellent performance. 3) Structure and style design of individual soldier's flame retardant protective equipment The structure and style of individual soldier's flame r...
发表评论
阅读全文